seoreseller Architectural Specifications - Doralum | Impact Door Manufacturing Miami

Impact Door Types

Door Specifications

DORALUM was the first company to manufacture doors using 4″ stiles and jambs, with a wall thickness of .078″ for added strength and security. 6’8″ heights shown (actual overall height 793/4”). 8’0″ high units have an additional row of lites (actual overall height 953/4”). All doors are pre-hung and swing out. Doors are viewed from an exterior and are prepared for hardware on active door only. On double doors, the active panel is on the right. On single doors, specify the location of hinges, left or right when viewed from the outside.

6'8'' high

 

Code
Actual Overall
Door
width x height
2668
311/2″x 793/4″
S
3068
371/2″x 793/4″
S
5068
573/4″x 793/4″
D
3068
713/4″x 793/4″
D

8'0'' high

 

Code
Actual Overall
Door
width x height
2680
311/2″x 953/4″
S
3080
371/2″x 953/4″
S
5080
573/4″x 953/4″
D
6080
713/4″x 953/4″
D

Sidelite Specifications

Any of our sidelites can be ordered in traditional or full view configurations. They are available in custom sizes and can be turned horizontally for use as a picture window or transom.

6'8'' high

 

Code
Actual Overall
width x height
1068S
12″x 793/4″
1668S
18″x 793/4″
2068S
24″x 793/4″
2668S
30″x 793/4″
3068S
36″x 793/4″
3668S
42″x 793/4″
4068S
48″x 793/4″

8'0'' high

 

Code
Actual Overall
width x height
1080S
12″x 953/4″
1680S
18″x 953/4″
2080S
24″x 953/4″
2680S
30″x 953/4″
3080S
36″x 953/4″
3680S
42″x 953/4″
4080S
48″x 953/4″

 

General Notes

General:
Series #100 French Patio Doors shall be manufactured by DorAlum, Miami FL. and shall meet or exceed the South Florida Building Code and ASCE 7-88 on certain elevations.

Materials:
All frame and door members consist of .078″ wall thickness extruded aluminum alloy 6063-T6. Threshold shall be the bumper type with bulb vinyl weather stripping, 4″x ½” and 1 ⅜” at the sill.

Construction:
Frames shall be coped with four screw splines and one door stop fin used at head and jamb. Corners are butt joined. Door stiles consist of 1 ¾” x 4 ⅛” face with a .078″ wall thickness extruded aluminum and a built in door stop. Top and bottom rails are secured to stiles with ⅜”-16x full length steel rod using 4″ long jamb stiffener, a ⅜” nut and washer at each end. An additional open back adapter, 1 ⅝” x 4 3/16″, is used at intermediate fixed vertical mullions.

Weather Stripping:
Double row of pile with integral plastic fin at each panel bottom rail. Single row of bulb vinyl at each lock stile of double panel door. Double row of bulb vinyl at frame sill.

Hardware:
A non-corrosive flush bolt is standard for inactive leafs. Active leaf pre-bored for double lockset 2 ⅛” for a 2 ⅜” backset (Gov.161). Three heavy-duty, ⅛” thick extruded aluminum butt hinges, 7 ⅞” long with 5⁄16″ plated steel rod. Anti lift-out pins.

Glazing:
Door panels pocket glazed using a flexible glazing spline.

Finish:
All aluminum members will receive an ESP finish. Standard color is white.

Doralum Technical Advantages

  • Financial Responsibility to Our Clients
  • Product Approved For South Florida Building Code
  • Avaialble with impact resistant glass
  • Heavy guage extruded Almuninium 6063T6 door and frame
  • Commercial Rated flush mount bolts
  • Double weather strip around perimeter with sealed top and bottom rails
  • Full view or colonial muntins
  • Excluded double astragal
  • Standard lock setup for hardware.
    Brass Hardware optional
  • Tempered safety glass 3/18″.
  • Forced Entry Prove and burglar Resistant
  • Tie-Rod.door leaf construction prevents door from sagging.
  • Solid Tabular construction on frame and door.
  • Installation holes are pre-drilled on the interior side and supplied with cover caps.
  • Standard and custom colors are available.
  • Custom glass etching design available.
  • The most solid door on the market.

Impact Resistant Doors

 

DESIGN LOAD CAPACITY – PSF

AVERAGE WIDTH

INCHES

DOOR HEIGHT

FT./ IN.

GLASS TYPE ‘A’
GLASS TYPE
‘B’ & ‘C’
EXT. (+)
INT. (–)
EXT. (+)
INT. (–)
32
7/ 0
62.0
81.0
62.0
81.0
33
62.0
78.3
62.0
81.0
34
62.0
69.8
62.0
81.0
35
62.0
66.5
62.0
81.0
36
62.0
63.1
62.0
81.0
32
8/ 0
62.0
81.0
62.0
81.0
33
62.0
78.3
62.0
79.2
34
62.0
69.8
62.0
78.3
35
62.0
66.5
62.0
77.6
36
62.0
63.1
62.0
76.5

Non-impact Doors

 

NOMINAL DIMS.
DESIGN LOAD – PSF
DOOR HEIGHT
LEAF WIDTH
EXT. (+)
INT. (–)
6/ 8
2/ 6
71.4
91.0
2/ 8
68.0
86.9
2/ 10
65.0
83.1
3/ 0
62.4
79.8
8/ 0
2/ 6
57.3
73.3
2/ 8
54.4
69.5
2/ 10
51.8
66.3
3/ 0
49.6
63.4
IMPACT RESISTANT SHUTTERS REQUIRED

 

Note: Wind load data for reference only. See product approval sheet for all details.

© 2019 Doralum Corp. All Rights Reserved. Web Development: Ntreegdesigns.com
Call Now ButtonCall Now! 305-884-3922